CY7C68013A, CY7C68014A
CY7C68015A, CY7C68016A
EZ-USB
®
FX2LP™ USB Microcontroller
High-Speed USB Peripheral Controller
Cypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600
Document Number: 38-08032 Rev. *X Revised January 15, 2015
EZ-USB FX2LP™ USB Microcontroller High Speed USB Peripheral Controller
Features
■ USB 2.0 USB IF Hi-Speed certified (TID # 40460272)
■ Single-chip integrated USB 2.0 transceiver, smart SIE, and
enhanced 8051 microprocessor
■ Fit-, form-, and function-compatible with the FX2
❐ Pin-compatible0
❐ Object-code-compatible
❐ Functionally compatible (FX2LP is a superset)
■ Ultra-low power: I
CC
no more than 85 mA in any mode
❐ Ideal for bus- and battery-powered applications
■ Software: 8051 code runs from:
❐ Internal RAM, which is downloaded through USB
❐ Internal RAM, which is loaded from EEPROM
❐ External memory device (128-pin package)
■ 16 KB of on-chip code/data RAM
■ Four programmable BULK, INTERRUPT, and
ISOCHRONOUS endpoints
❐ Buffering options: Double, triple, and quad
■ Additional programmable (BULK/INTERRUPT) 64-byte
endpoint
■ 8-bit or 16-bit external data interface
■ Smart media standard ECC generation
■ GPIF™ (general programmable interface)
❐ Enables direct connection to most parallel interfaces
❐ Programmable waveform descriptors and configuration
registers to define waveforms
❐ Supports multiple ready (RDY) inputs and control (CTL)
outputs
■ Integrated, industry-standard, enhanced 8051
❐ 48-MHz, 24-MHz, or 12-MHz CPU operation
❐ Four clocks per instruction cycle
❐ Two USARTs
❐ Three counter/timers
❐ Expanded interrupt system
❐ Two data pointers
■ 3.3-V operation with 5-V tolerant inputs
■ Vectored USB interrupts and GPIF/FIFO interrupts
■ Separate data buffers for the setup and data portions of a
CONTROL transfer
■ Integrated I
2
C controller; runs at 100 or 400 kHz
■ Four integrated FIFOs
❐ Integrated glue logic and FIFOs lower system cost
❐ Automatic conversion to and from 16-bit buses
❐ Master or slave operation
❐ Uses external clock or asynchronous strobes
❐ Easy interface to ASIC and DSP ICs
■ Available in commercial and industrial temperature grades
(all packages except VFBGA)
Features (CY7C68013A/14A only)
■ CY7C68014A: Ideal for battery-powered applications
❐ Suspend current: 100 A (typ)
■ CY7C68013A: Ideal for nonbattery-powered applications
❐ Suspend current: 300 A (typ)
■ Available in five Pb-free packages with up to 40 GPIOs
❐ 128-pin TQFP (40 GPIOs), 100-pin TQFP (40 GPIOs), 56-pin
QFN (24 GPIOs), 56-pin SSOP (24 GPIOs), and 56-pin
VFBGA (24 GPIOs)
Features (CY7C68015A/16A only)
■ CY7C68016A: Ideal for battery-powered applications
❐ Suspend current: 100 A (typ)
■ CY7C68015A: Ideal for nonbattery-powered applications
❐ Suspend current: 300 A (typ)
■ Available in Pb-free 56-pin QFN package (26 GPIOs)
■ Two more GPIOs than CY7C68013A/14A enabling additional